Checkweigher Instrument Maintenance Manual

After the application of the weighing transmitter, it is reasonable to remove the smoke and dust and its residues that are often in the weighing transmitter. In addition to fully preparing for the application at that time, it can also be used for machine equipment. maintenance.The weighing transmitter must also regularly maintain the application status of the various components of the packaging scale. It cannot be used improvised, otherwise the machinery and equipment will have large omissions. Therefore, it is necessary to effectively ensure the quality of the weighing scale and its extension. During the service life of the weighing transmitter, it is necessary to do a good job of imitation.

The checkweigher is suitable for net weight express sorting and sorting. It has the characteristics of fast net weight judgment and high identification precision. It can preset 100 kinds of commodity sorting machine (recheck) main parameters, and can store 20,000 sorting machines ( Re-inspection) result statistics; according to different sorting machine methods, it can remove overloaded or underweight goods (pneumatic lever or flat push rod), and can carry out multi-level sorting machine for goods according to net weight.

The maintenance and maintenance of the weighing transmitter in normal applications must pay attention to the following matters:

1. During maintenance and inspection, please try to disconnect the switching power supply of the equipment, and carry out the actual operation by the maintenance staff who have undergone professional skills training.

2. Interprofessional maintenance staff, do not disassemble this machine!

3. After daily use, the areas that have immediate contact with the object to be tested, such as the feeding belt, the weighing belt, the sorting machine belt, the rotating rod, and the sand-proof cover, should be cleaned up.

4. Before each application, the coordination ability of the three conveyor belts should be checked to prevent them from being stuck, and then scratching or grinding the transmission belt.

5. According to the conditions of the natural environment, carry out a dust removal for the machinery and equipment every necessary time.

During the whole process of the weighing transmitter, the actual operation should be carried out in a relatively dry area and a natural environment with excellent natural ventilation. The surrounding of the machinery and equipment is not allowed to have dirt. In the work of doing a good job of the grounding device of its machinery and equipment, under normal circumstances, the instruments and meters are all very prone to electrostatic induction. If it cannot be eliminated immediately, it is very easy to damage the machinery and equipment.