The packing scale instrument controllerYeswithSLSSelf-learning algorithm, dual-channel quantitative packaging controller module based on Chinese touch screen, supports no bucket scale, bucket scale, valve port scale, bulk material accumulation and other modes. The user only needs to set the target value and the approximate value of other formula parameters. In normal operation, the controller will automatically find out the suitable large throw advance, medium throw advance, small throw drop value and forbidden comparison time to meet the requirements of speed and accuracy.Users can also use the Chinese touch screen interface prepared by our factory to further increase the ease of use of the product. The controller has the following outstanding features:

1.Multiple Digital Filtering Algorithms

2.Automatic zero tracking function

3.Switch quantity test and switch quantity custom function

4.20Recipe parameter settings for different parameters

5.Over and under tolerance detection

6.Support serial port upgrade program

this packagingscale meterThe controller is connected to an external resistance strain bridge load cell. There are two wiring methods: 6-wire connection and 4-wire connection. Standard 6-wire sensor wiring needs to be connected to EX plus SN plus, EX- and SN- Connect the module port after short-circuiting. Since the sensor signal is an analog signal that is sensitive to electronic noise, the sensor wiring should be shielded and laid separately from other cables, especially away from the AC power supply. It has 7 channels that can be customized The input switch value and 12 channels of customizable output switch value are convenient for peripheral control and operation. When the module is powered on, there will be a long beep. At the same time, RS232 and RS485 will be fixedly configured as 9600- 8-N-1, address 1, and last for 3 seconds. During these 3 seconds, external devices can use 9600-8-N-1, address 1 for normal communication and set serial communication mode.