The checkweigher instrument is one of the weighing instruments. There are many classifications of them. The scope of application of different instrument panels and their relative functions are all different. Different, for customers, the application problems should be paid attention to. I hope you can master the application problems of the checkweigher instrument.

Checkweigher MeterUnlike basic scales because of their programmable tolerances and advanced features, checkweigher gauge tolerances allow the operator to enter a range of weights and have different colored lights indicating whether the item being weighed is within, above or below the target tolerance range. They are already used and beneficial to companies in many different industries including industrial, chemical engineering and food industries.

The weight of a product is one of the important benchmarks measured in the quality control process, whether for consumer products or automotive components. Being able to take accurate, fast measurements and send to a PC for statistical analysis is one of the key functions of quality control.

Small Footprint: The checkweigher meter is designed to optimize panel space and is only 76.2mm (3in) deep.

Easy to install: No special tools or expertise required, just drill 5 to 9 standard holes in the panel and attach the front panel keyboard display; no rectangular cutout required. The controller enclosure can be mounted on the rear of the panel or away from the 100 DIN rail from feet away. Choice of panel\/remote mount, DIN rail mount and wall mount.

Easy Setup: Set up instrument parameters from anywhere on the Ethernet network using the embedded web server. Setup is quick and easy using the front panel keys and LCD display. RSLogix is ​​easily configured using the Rockwell Additional Profile (AOP).

Accessibility: Embedded Ethernet communication ports in the checkweigher meter enable users to easily share data between production facilities, eliminating the time and cost associated with new network wiring.

The length of the cable from the controller to the checkweigher instrument should be limited. Because in the cable, the copper core cable that outputs the excitation working voltage to the controller has a very considerable amount of current. Due to the actual effect of the transmission line resistor, It will deplete (reduce) the excitation working voltage sent to the controller, which will then endanger the operation of the sensor. The length of this cable will be determined in the application specification of the checkweigher instrument, so it must be checked, if required For a slightly longer transmission distance, the copper core cable with bold font can also be used. In each standard electronic scale, the application of the checkweigher instrument has been selected by the staff. Each checkweigher instrument, inside Generally, a set of voltage regulator tube DC voltage stabilized power supply is always prepared, which is given to the controller as a general weighing instrument with excitation working voltage (bridge output working voltage), and the working voltage is 5V, 6V, 10V, 11.5V, 15V.