The force measuring instrument can be combined into a testing machine for different purposes to perform accurate insertion and extraction force, pressure, destructive experiments and other tests. While displaying the force value, an additional ruler can be installed to display the displacement, so as to measure the same displacement Different workpieces under different conditions can be compared and tested. The force measuring instrument has high-speed processing of 2000 times per second and rich communication interfaces. The input signal of the sensor can be displayed in real time. The necessary points in the waveform can be compared with the set value and the upper and lower limits of the input and output Compare. The set value can be edited and saved by the special communication software, and the CSV file format of the measurement data can also be output.

●DynamometerThe whole machine adopts electromagnetic compatibility design, strong anti-interference ability, suitable for industrial environment.

32-bit ARM processor, clocked at 48 MHz, running fast;

●5-digit red light-emitting 2-pole digital tube, English character\/number display;

●Menu operation and shortcut operation;

●24-bit high-precision high-speed Σ-△ analog-to-digital conversion module, internal resolution 1\/1 million, sampling frequency 640 Hz; adopted.

●DynamometerThe unique anti-vibration filtering algorithm is adopted to ensure the stability and accuracy of the weighing result when the scale body vibrates strongly, and the fast response ability when the weight changes.

●Weighing signal can be selected: millivolt, volt, milliamp, respectively connect with "mV" output weighing sensor, "volt" voltage output weighing transmitter, "mA" current output weighing transmitter;

●With power-on automatic initial zero setting, automatic zero tracking, zero fine-tuning, zero calibration and load calibration.

●Can choose digital calibration, subsection correction and subsection calculation functions;

●DynamometerWith automatic encryption, key encryption, key decryption, digital setting, digital adjustment and interface testing functions.

●Bidirectional relay switches (including normally open contacts and normally closed contacts) output upper\/lower limit alarm signals;

●An optional and definable analog signal output AO: 020mA;

●DynamometerOptional RS232 and RS485 communication ports can be connected to the upper computer industrial computer\/programmable controller and light-emitting diode remote display; (14) The multi-task working mode is adopted, which does not affect weighing, alarm output and other operations such as parameter setting. signal transmission process.

The force measuring instrument is suitable for weighing display, peak detection\/display hold, upper\/lower limit alarm output and analog acousto-optic\/digital transmission.