the controllerYesA weighing control developed for the batching control process of dynamic real-time batching equipmentModule. Users can also use the Chinese touch screen interface prepared by our factory to further increase the ease of use of the product. It supports the adjustment of batching sequence, the pause between materials, and the power-off saving function. It can be widely used in feed, chemical industry, construction, etc. controlled industry.The controller has the following outstanding features:

1.Multiple Digital Filtering Algorithms

2.Automatic zero tracking function

3.Switch quantity test and switch quantity custom function

4.20Recipe parameter settings for different parameters

5.Over and under tolerance detection

6.Support serial port upgrade program

The controller is connected to an external resistance strain bridge load cell. There are two wiring methods: 6-wire connection and 4-wire connection. Standard 6-wire sensor wiring needs to add EX and SN, EX- and SN respectively. - Short-circuit and then connect to the module port. Since the sensor signal is an analog signal that is more sensitive to electronic noise, the sensor wiring should be shielded and laid separately from other cables, especially away from the AC power supply. The defined input switch and 12 customizable output switches are convenient for peripheral control and operation. When the module is powered on, there will be a long beep. At the same time, RS232 and RS485 will be fixedly configured as 9600 -8-N-1, address 1, and last for 3 seconds. During these 3 seconds, external devices can use 9600-8-N-1, address 1 for normal communication and set serial communication mode.