The force measuring instrument displays information during the period of resolution with total value, net value, peak value, and valley value display, which can be switched at any time. 2-way comparison output, 6 alarm modes can be selected. The peak and valley values ​​use 2 comparison values ​​as thresholds. When real-time Peak comparison is performed when the weight exceeds the peak threshold. Valley comparison is performed when the real-time weight is lower than the valley threshold.

1, 12 indicators, alarm 1, alarm 2, stable, zero, total value, net value, peak value, valley value, t, kg, g, kN, high precision and high resolution.

2,5 test modes,Dynamometer3 display modes are available (to maximize the test efficiency). The convenient software (Torimon USB) that can log the measurement data to the Excl at a speed of 100 times\/second can efficiently compile the measurement on the PC data.

3, N (Newton), kg (kg), lb (pound) three kinds of measurement units are available for selection, mutual conversion. ?

4. Gravitational acceleration setting function: the user can input the precise value of the gravitational acceleration of the place of use by himself. Make the test and unit conversion more accurate.

5. The interface adopts ordinary USB interface, data logging and computer connection can be easily carried out, peak hold function. Keep peak value display until manual reset.

6. There are continuous storage, separate storage, standard 3 ways, can store up to 1000 data (continuous storage mode), automatic peak function, the force measuring instrument can set the time freely, from 1-9999 seconds.

7. The upper and lower limits can be set for statistical analysis. The buzzer can alarm if the upper and lower limits exceed the limited range.

8. Rich measurement function, used in conjunction with automatic test stand, can be used for various measurements, data storage function, can store 447 test values.

9. Data output function, data can be input to the computer through the data line for various analysis. (It can also be applied to multiple instruments and a computer for various analysis at the same time.)

10, Green and environmental protection, the force measuring instrument will automatically shut down after 10 minutes of no operation. 10 minutes is the default, and the automatic shutdown can be set to the required automatic shutdown time. When the automatic shutdown is set to 0, it will not automatically shut down.

11. High-quality charging power supply. The charging voltage is available from 100V to 240V, which can be adapted to most domestic and foreign regions. It also has short circuit, leakage and overload protection functions.

12. The unique switch contact on-off force test function makes the switch on-off force test more accurate. ?

13. The upper limit and lower limit can be set to judge whether the measured value is qualified or not, and the 6-digit large screen displays.

14. Low battery detection shutdown, in the case of low battery power, it will automatically shut down to prevent inaccurate measurements caused by insufficient battery.

Force measuring instruments are widely used in electronic appliances, construction equipment, light industrial textiles, auto parts, lighters and other ignition devices, fire fighting equipment, pen making, lock making, fishing gear, chemical industry, power machinery, scientific research institutions and other industries. Pulling force test, destructive test, etc. The digital display has high resolution, high sampling speed, and is easy to use. It is a new generation of high-efficiency and high-precision push-pull force testing instruments.