Product overview of domestic force measuring instruments Through the waveform display, the change process of physical quantities that is difficult to observe by traditional digital instruments can be captured.

A dynamometer is a dynamometer that measures various physical quantities such as force, pressure, and torque by processing resistance strain sensor signals and displays their dynamic waveforms.

Through the waveform display, the changing process of physical quantities that are difficult to be visually observed by traditional digital instruments can be captured.

DynamometerHigh-speed processing capability of up to 2000 times per second, even subtle numerical changes can be reflected in real time. In addition to the upper and lower limit comparison functions, it also has various hold functions and judgment functions. These functions are used in various production control management, automatic Instruments, testing machines, etc.

Product features of domestic force measuring instruments

It is a dynamometer that measures pressure, load, torque, displacement, etc. by processing strain sensor signals.

It has a rich holding function and a pass\/fail judgment function, which makes it play an important role in the field of factory on-line quality management.

The performance parameters of domestic force measuring instruments are:

Waveform display: Through the waveform display, the changing process of physical quantities that are difficult to be visually observed by traditional digital instruments can be captured.

External output signal: (16 points) large input \/ medium input \/ small input \/ completion \/ unloading \/ bag sealing \/ error selection 1, 2 \/ output selection 1-6 \/ reserve 1, 2

When the signal is ON, the output transistor is ON.

External input signal: (16 points) operation permission \/ weighing start \/ stop \/ unloading command \/ manual unloading \/ unloading door open \/ cumulative reset \/ input selection 1-6 \/ code 1, 2 contacts (relays, switches, etc.) Or contactless (transistor, TTL of collector switch output, etc.) connection possible

Sensor voltage: 10VDC, 150mA

Sensor sensitivity: less than or equal to 2.8 mV\/V

Nonlinear error: less than or equal to ±0.01 percent FS

Internal Resolution: 500000

Sampling speed: 1-200 times\/second can be set by the user

Digital display: 5-digit data display, with peak hold function, automatic\/manual 2 ways to release

Display range: 0 - 99999 can be set arbitrarily

Display graduation: 1,2,5,10,20,50,100,200

Zero adjustment range: digital zero adjustment can be set within 80% of full scale

Analog output: 4-20mA (high precision 16-bit D\/A)

Digital output: RS232C or RS485 serial port; Modbus RTU protocol and Fable free protocol

Control contact output: 4-way relay control contact output, the capacity is 250VAC 3A or 30VDC 3A

Power supply: 220VAC±10% 50Hz, power consumption 5W

Use environment: temperature -10-60 degrees Celsius, relative humidity less than or equal to 85 percent

Instrument structure: desktop and panel mounted, 3 sizes optional

RS-485 communication interface (select from Modbus-RTU, unique format)

232: RS-232C communication interface (optional)

BCO:BCD Output Interface Sink Type (Optional)

BSC:BCD output interface Source Type (optional)

DAC:D\/A converter interface (optional)

ODN: DeviceNet interface (option)

PRF: PROFIBUS interface (option) ※PROFIBUS-DPV0

CCL:CC-Link interface (option)