A force measuring instrument is a mechanical measuring instrument that measures the force in mechanical equipment, also known as a force measuring instrument. A force measuring instrument is generally composed of a force sensor, a measuring circuit and an indicator, and is classified according to the working principle of the force sensor. A sensor is a measuring element that converts the measured force into an electrical signal output.

DynamometerIt has the characteristics of small size, light weight, easy to carry, multi-function, high precision, and curve capture of the whole test process. It is suitable for push-pull test, plug-in force test, destructive test of various products, and can be combined with various testing machines. Tables and fixtures form small testing machines for different purposes.

The technical parameters of the force measuring instrument with high versatility:

1. Conditions of use: ambient temperature -10-50 degrees Celsius, relative humidity less than or equal to 90 percent.

2. The top display shows the real-time value, and the bottom display shows the peak value (the peak value can be automatically stored).

3, Power supply voltage: AC220V or DC24V (±5V).

4. Measurement error: less than or equal to 0.01 percent FS. Upper and lower limit 2-point independent relay output (optional), buzzer, and the display screen prompts an alarm at the same time;

5. The power supply voltage of the bridge circuit: 5V, and the force measuring instrument can be connected in parallel with 8 350Ω sensors.

6. Output node: 3-way relay or 3-way transistor NPN (24-output valid).

7. Output interface: The basic configuration of the force measuring instrument is RS232 serial port, optional configuration is RS485 serial port, 20mA current loop serial port, 0-5V\/1-5V\/0-10V voltage, 0-20mA\/4-20mA analog.

8. Measuring range: -18 mV 18 mV\/V. 3 units of N, kg, lb are automatically converted;

9. The power of the product is less than or equal to 10W. It has a peak hold function, and the peak automatic release and release time can be set;

10, A\/D conversion speedLess than or equal to 1200 times\/second. The peak value, real-time value, and the test process curve are displayed on the same screen, which can monitor and trace the entire test process;

11. Hole size: 93±0.5mm 46±0.5mm. Through the special test software for PC, the test curve data can be stored, transmitted and traced indefinitely;