The weighing signal transmitter is a force measuring instrument that can convert the millivolt signal into a standard DC signal through isolation and amplification. Wide range, high accuracy, easy to detect and maintain by rail installation. Widely used in data acquisition, signal transmission conversion and DCS distributed control system.

Weighing transmitter brand recommendation

Single-channel transmission instrument EXT201-D weighing transmitter is an industrial-grade general-purpose multi-channel weighing control module independently developed by Shenzhen Anpu Measurement and Control Technology Co., Ltd., which can achieve stable, reliable, high-precision industrial weighing, and will weigh The weighing results can be output through Ethernet or serial, providing technical solutions for various industrial control fields in weighing mode. A single module can support up to 4 channels to work independently.

The weighing transmitter module can support up to 4 channels of independent work, each channel has an independent precision bridge source, with high precision and fast speed.

The module supports 2 Ethernet interfaces, and multiple modules can be cascaded by daisy chain. Ethernet supports standard MODBUS TCP\/IP protocol, standard MODBUS RTU Over TCP\/IP protocol, and also supports HTTP protocol to read setting parameters.

The module serial bus adopts standard Modbus RTU protocol, half-duplex RS-485 serial port transmission, can set interface parameters, sampling and filtering parameters, weighing platform setting parameters, measurement value calibration parameters, tare and zero parameters, state detection parameters, etc. .

The weighing transmitter can be used for the collection and calibration of weight data, and is widely used in velvet filling, cotton filling, batching, packaging, chemical and other industries.

The weighing transmitter can supply the function of 10V precision power supply, and can realize the collection, isolation and transmission of the MV signal of the weighing sensor. Reload the MV signal of the sensor, and superimpose it to output a standard analog signal (eg: 0-10V, 0-5V, 0-20mA, 4-20mA).

weighing transmitterThe brand recommends Anpu measurement and control checkweigher all-in-one machine. This controller is connected to an external resistance strain bridge load cell. There are two wiring methods: 6-wire connection method and 4-wire connection method. Since the sensor signal is a comparison of electronic noise Sensitive analog signals, so the sensor wiring should be shielded cables and laid separately from other cables, especially away from the AC power supply. It has 7 customizable input switches and 12 customizable output switches, which is convenient for Peripheral control and operation.