The force measuring instrument is a weighing control module oriented to the field of process weighing. The force measuring instrument module has strong functions, friendly interface, rich information, simple operation and stable performance.

Product features of force measuring instrument:

● Modular design, rail type device

● 6-digit digital tube display, clear reading under any lighting conditions

● The basic weighing operations of clearing, tareing and clearing can be directly performed on the panel

● AD collects 200 times per second, high anti-interference, successfully dealt with the interference of the instrument when the walkie-talkie is calibrated on site, but also the interference of the servo system within 10KW.

● Rich output interface: RS232, RS485 support Modbus RTU protocol, (can customize the output format, currently mainly support the continuous output of Toledo, the continuous output format of power transmission. If there are other representative output formats, can be customized.)

● There are a variety of optional output methods for the analog output. After calibration, the analog output corresponds automatically, and there is no need to adjust twice.

● Convenient calibration method. When there is no weight that meets the calibration request on site, the maximum range can be reduced by 10 times, and then the calibration is stopped.

● Correct the maximum range, decimal point position, and minimum division value without affecting the calibration result.

Application areas:

● Various static weighing control systems such as: mixing station weighing display control system, non-explosion-proof chemical industry, medicine reaction kettle weighing control system.

Dynamometer technical specifications and performance:

shell

Plastic housing with display and operating panel

Dimensions (WxHxD)

86.8mm57.9mm71.5mm

Safe maintenance

IP20

Operating environment

Temperature: -10 degrees - 40 degrees Celsius (14 degrees - 104 degrees F); Relative Humidity: 10 percent - 95 percent, non-condensing

power supply

Add 24VDC (±10 percent), power lt; 3W

display

6-bit green digital tube, height 0.32";

weight manifest

The maximum display division is 100,000

Weighing platform type

1 dummy weighing platform

Number of sensors

1-6 350 ohm sensors (2 or 3mV\/V flexibility)

A\/D update rate

A\/D conversion rate: 200Hz

sensor encourage voltage

5VDC

Minimum input flexibility

0.6μV\/d

keyboard

4 light touch membrane function buttons

serial port

One RS-232, 4800-115,200 baud rate; one RS-485, 4800-115,200 baud rate

supporting agreement

Continuous output, MODBUS-RTU

Analog output

0-5V, 0-10V, -5V- plus 5V, -10V- plus 10V, 0-20mA, 4-20mA, 0-24mA

Display and keyboard:

● The display screen of the force measuring instrument module consists of 6 0.32" green digital tubes.

● There are 4 basic function keys on the front of the display screen of the force measuring instrument, which can complete the reset, tare, selection and confirmation. At the same time, they can also be used to enter the setting menu, select setting options and input parameter values.

Weighing platform application:

The dynamometer module supports analog scales, which can provide a 5V boost voltage to drive six analog sensors of 350 ohms. The 6-wire sensor can ensure the accuracy of measurement even if the sensor cable resistance changes with temperature.

Installation method:

The dynamometer module is a standard guide rail device, which can be installed on a 35mm wide guide rail. First, make sure that the fixed lock has been unlocked, and then stick the dynamometer on the guide rail in the direction of the red arrow below, and the module must be removed from the guide rail. method is similar.