Description
The control module is dedicated to electric scales, with SLS intelligent packaging algorithm, supports no bucket scale, bucket scale, valve port scale, bulk material accumulation and other modes. The built-in stepper motor PWM output can be directly connected to the stepper motor driver , No additional PLC program is required, setting and debugging are extremely simple. For the packaging process, the user only needs to set the approximate value of the large throw advance amount, the medium throw advance amount, and the small throw drop value to run normally, and it will automatically find during operation. Find the appropriate value to meet the accuracy and speed requirements, and adjust it in real time in the subsequent packaging process. Users can also use the Chinese touch screen interface prepared by our factory to
The control module is dedicated to electric scales, withSLSIntelligent packaging algorithm, support no bucket scale, bucket scale, valve port scale, bulk material accumulation and other modes. Built-in stepper motorPWMOutput, can be directly connected to the stepper motor driver, no additionalPLCThe program, setting and debugging are extremely simple. For the packaging process, the user only needs to set the approximate value of the large throw advance, the medium throw advance and the small throw drop value to run normally, and it will automatically find the appropriate one during operation. value to meet the accuracy and speed requirements, and adjust in real time during the subsequent packaging process.Users can also use the Chinese touch screen interface prepared by our factory to further increase the usability of the product.The controller has the following outstanding features:
1.Multiple Digital Filtering Algorithms
2.Automatic zero tracking function
3.Switch quantity test and switch quantity custom function
4.20Recipe parameter settings for different parameters
5.Over and under tolerance detection
6.Support serial port upgrade program
The controller is connected to an external resistance strain bridge load cell. There are two wiring methods: 6-wire connection and 4-wire connection. Standard 6-wire sensor wiring needs to add EX and SN, EX- and SN respectively. - Short-circuit and then connect to the module port. Since the sensor signal is an analog signal that is more sensitive to electronic noise, the sensor wiring should be shielded and laid separately from other cables, especially away from the AC power supply. The defined input switch and 12 customizable output switches are convenient for peripheral control and operation. When the module is powered on, there will be a long beep. At the same time, RS232 and RS485 will be fixedly configured as 9600 -8-N-1, address 1, and last for 3 seconds. During these 3 seconds, external devices can use 9600-8-N-1, address 1 for normal communication and set serial communication mode.
3 22, 2020
3 15, 2020
