This transmitter is a weight display with Chinese display, which can be parameterized to define 3 output conditions and perform weight reset through external input.The weighing indicator has the characteristics of small size, stable performance, simple and applicable operation. It can be widely used in: concrete mixing and asphalt mixture equipment, metallurgical blast furnace, converter and chemical industry, weight control of feed and other occasions.

Has the following basic characteristics:

1.OLEDDisplay in Chinese

2.Switch quantity: 2 input\/3 output

3.13-way clear input, 3-way conditional output

4.Optional: serial output (RS232, RS485) or analog output (0-5V, 0-10v, 420mA, 0-20mA, 0-24mA. Current custom, voltage custom)

This weight transmitter needs an external resistance strain bridge load cell. There are two wiring methods: 6-wire connection method and 4-wire connection method. Since the sensor signal is an analog signal that is sensitive to electronic noise, the sensor wiring Shielded cables should be used and laid separately from other cables, especially away from the AC power supply. In addition, the instrument has 4 buttons and 2 in and 3 IO ports. The buttons can be used for exit\/clear selection\/up, mode\/right, Confirm. IO are: 2-way switch input for clearing, 3-way switch output for conditional output. When the serial port is selected, the instrument can choose 485\/232 communication and support Modbus-RTU-H (high byte first ), Modbus-RTU-L (low byte first), Modbus-ASCII, BCD (continuous transmission), RE-continuous, RE-command and other protocols.